Industrial Automated Workpiece Clamping Fittings for Robotic Pick & Place Equipment, HDQ2/3/4-25/32/50/63/80/100-P Four Jaw Mechanical Finger Cylinder

First, check the appearance and performance of the finger cylinder before installation, confirm that the cylinder body, jaws and sealing parts are intact without deformation, damage or air leakage, and verify that the specification matches the equipment requirements. Second, clean the mounting position of the robotic arm or automation fixture, remove dust, oil stains and sundries, fix the cylinder steadily with matching screws according to the standard mounting holes, and ensure the equipment is installed horizontally and firmly. Third, connect the pneumatic pipeline correctly, check the air tightness of the interface, adjust the air pressure to the standard working range, and confirm no air leakage at the pipeline and cylinder connection. Fourth, conduct idle operation test to check whether the four clamping jaws open and close synchronously and flexibly, with no jamming or abnormal noise. Fifth, place the target cylindrical workpiece for trial clamping, fine-tune the air pressure and clamping stroke according to the workpiece size and weight to ensure firm and stable clamping without crushing or slipping the workpiece. Sixth, after confirming the trial run is normal, start formal automated picking, placing and assembly work. For daily maintenance, regularly clean dust and oil stains on the cylinder surface and jaws, check the sealing performance and clamping accuracy regularly, and replace vulnerable parts in time to ensure long-term stable operation of the automation equipment.